Cables

"Which cable should we better use for the internal wiring of our loudspeakers?"

To answer this question competently, we have already devoted close attention to the design or construction of loudspeaker cables and thus made intensive researches.We have found the results, by taking into consderation the conductor material and its cross-section, the dielectric, the structure, and not least the production problems.

  • slide
  • slide
  • slide

SP1-OCC

Construction:
- 10 rotated OCC conductors on air-tube
- Single layer with 10 strands, marked as 5 colored and 5 black
- Silk-paper for resonance-control
- Non-aging PU outer jacket

Specification:
Conductor: Ultra-Pure-Ohno-Continous
Casting copper wire (UPOCC) also known as OCC
Insulation: High Quality FPE insulation with low dielectric constant and low dielectric absorption
Outer Diameter: 8,5 mm
Wire Diameter each single conductor: 0,7 mm = 0,385 mm²
Number of strands: 10
Insulation thickness: 0,4 mm
*Inductivity: 0,70 µH/m @ 1kHz
*Capacitance: 80,0 pF/m @ 1kHz

*= Wiring: all colored interconnected (plus) / all black interconnected (GND)

  • slide
  • slide

SP2-OCC

Construction:
- 20 reverse rotated OCC conductors on air-tube
- double layer with 20 strands, marked with 10 in gray inside and 10 in white outside with spacers in between
- Mylar-foil for resonance-control
- Non-aging PU outer sleeving

Specification:
Conductor: Ultra-Pure-Ohno-Continous Casting
copper wire (UPOCC), also known as OCC
Insulation: High Quality FPE insulation with low dielectric constant and low dielectric absorption
Outer diameter: 13 mm
Wire Diameter each single Conductor: 0,7 mm = 0,385 mm²
Number of strands: 20
Insulation thickness: 0,4 mm
*Inductivity: 0,63 µH/m @ 1kHz
*Capacitance: 96,6 pF/m @ 1kHz

*=These data refer to our favorite interconnection

Keep in Touch

Sign up for our newsletter and we will keep you up to date on all new developments and products available
For information on our privacy policy, click here: Privacy.